Washers and water

Yes, it's made for HE and standard washers. The glucoside cleaners are low-sudsing, which is what HE machines want.^† HE guide.

Yes. Same dose, sheet in the drum first.

Yes. Put the sheet in the empty drum, then clothes.

Yes. Put the sheet at the back of the empty drum, then clothes.

Yes. Drop the sheet into the drum around the agitator before adding clothes.

Yes. Sheet on the bottom first, clothes on top.

Yes. Put the sheet in the drum, not the dispenser.

Yes. Use half a sheet, and dissolve it in warm water first for small, quick machines.

Yes. Loads are smaller, so half a sheet is often enough.

Yes. Dissolve the sheet in the wash tub water before adding clothes.

Yes. Stacked units are standard front or top loaders, so dose the same way.

Just 7 isn't made for one brand: it goes in the drum of any HE or standard washer. Follow your manual for the cycle.

Yes. Speed Queens are standard top or front loaders, so put the sheet in the drum first.

Yes. Put the sheet in the drum, not the dispenser, and skip any auto-dosing feature.

Not in the auto-dose tank: it's for liquids. Put a sheet in the drum and turn auto-dosing off for that load.

Yes. Drop the sheet in the drum before your clothes.

No. Its glucoside cleaners are low-sudsing. Suds don't equal cleaning.

Low suds is normal and what HE washers want. Clean laundry doesn't need foam.

A sheet placed in the drum first is designed to dissolve in the wash.^† Don't put sheets in the dispenser drawer.

Just 7 is designed to dissolve in the wash.^† Don't put undissolved bits down a sink.

We haven't tested that yet, so we're not claiming it. We'll update this answer when we have data.

We haven't tested that, so we don't claim it. Follow your local greywater rules.

Two of our seven ingredients, sodium citrate and washing soda, are there for exactly that. They grab minerals so the cleaners can work.

Try one sheet first. For very hard water and dirty loads, step up to the next dose.

Signs include spots on glasses, crusty faucets and stiff, dull laundry. Your water utility can tell you the hardness.

Minerals bind to detergent and fabric. Hard water fixes.

Yes. Well water is often hard, which is why we include two water softeners.

Yes. In very soft water, half a sheet may be enough for light loads.

Not when dosed right. Overdosing and overloading are the usual causes of residue.

Usually trapped moisture and buildup. Leave the door open after washes and clean the gasket. Washer smell fixes.

Run a hot empty cycle with a washer cleaner, wipe the gasket and dispenser, and leave the door open to dry. Full guide.

No. Use a product made for washer cleaning.

We can't speak for washer makers. Most ask for HE-compatible, low-sudsing detergent, which Just 7 is designed to be.^†

It varies a lot by machine. HE washers use far less than older top loaders. Water per load.

Full loads, the right cycle and skipping needless rewashes. Water-saving tips.

Yes, heating water is a big part of a wash's energy use. Cold-water washing.

For everyday loads, often yes. Use warm or hot for heavy soil if the care label allows.

No. It's a washer detergent. Never put sheets in the dryer.

Yes. In softened water, start with the standard dose and adjust down for light loads.

Yes. Altitude doesn't change how you dose a laundry sheet.

Usually hard-water minerals or undissolved detergent from an overloaded drum. Load less and put the sheet in first.

Movement helps. Leave room in the drum so water and clothes can move.

Just 7 is a normal low-sudsing laundry detergent made for HE and standard washers.^† Wipe gaskets regularly as your manual suggests.

Washers vary, but cold is usually around 60 to 80°F. Very cold water below that can slow dissolving.

Tear the sheet in half, put it in first, use a slightly warmer setting if you can, and don't overstuff.